 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
T175 |
Serial # |
|
Year |
1996 |
Hours |
aprox 3000 |
Condition |
Good |
Dealer Name |
Wins Equipment |
Price |
$54,000 |
Location |
WI or IL |
Appearance |
7(scale of 1 to 10) |
Phone |
630 466 9688 or 262 835 4786 |
Additional Details |
Rayco T175, with Foresty Mower and Stump Cutter, ready to work condition, heated and A/C cab, tripple grouser, tracks in good shape, undercarrige, king pin and other components rebuild by CAT dealer in 2008, greaqt machine with both attachments. Call for details or demo. |
|
| |
| |
| |
|
 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
T275 |
Serial # |
|
Year |
2000 |
Hours |
3984 |
Condition |
Great |
Dealer Name |
Scott Hoffman |
Price |
$100,000 |
Location |
|
Appearance |
(scale of 1 to 10) |
Phone |
Contact Scott 815-693-6276 |
Additional Details |
4-08 replaced cutter wheel bearings,
1-08 rebuilt gear box, repack main cyl, sent pumps out to be tested all came back clear,
10-07 replaced king pin and boom assembly, new a/c comp, drier,
9-07 reconditioned under carriage grease cyl,sprockets, rollers, etc.,
7-06 replaced final drive machine was serviced every 250 hrs,
hyd filters, pump drive, final drive fluids changed every 250 hrs |
|
| |
| |
| |
|
 |
Make |
Telsta Manufacturing |
Dealer Stock # |
|
Model |
47Ft |
Serial # |
4F6L12616XA033304 |
Year |
1999 |
Hours |
NA |
Condition |
Excellent |
Dealer Name |
Rayco of Michigan |
Price |
$25,000 |
Location |
Northville Michigan |
Appearance |
8 (scale of 1 to 10) |
Phone |
269-207-6737 Call Steve or email Steve |
Additional Details |
9/07 got new hyd pump and safety switch, 13 HP Honda, Valve Controls not pistol grip, 300# Capacity bucket, 47Ft working height, pintle hitch, tires 90% |
|
| |
| |
| |
|
 |
Make |
Hydro-Ax |
Dealer Stock # |
|
Model |
621 |
Serial # |
2172 |
Year |
1986 |
Hours |
1,741 Actual Hours may vary |
Condition |
Very Good |
Dealer Name |
Rayco of Michigan |
Price |
$38,000 |
Location |
Northville Michigan |
Appearance |
7-8 (scale of 1 to 10) |
Phone |
313-402-6664 Call Phil or email Phil |
Additional Details |
Needs upper and lower bearing in the mower motor, A/C doesn't work, could use new knives.120 HP Detroit Diesel w/ new injectors, lift and tilt cylinders rebuilt fall 2007 pd. $2,800, Heat, Tires newer on front, Winch, uses 1/2 to 1 quart of engine oil every 8-10 working hours, Not Bad!! |
|
| |
| |
| |
|
 |
Make |
Morbark |
Dealer Stock # |
|
Model |
22 Total Chip Harvester w/Large Loader |
Serial # |
|
Year |
Late 70's |
Hours |
NA |
Condition |
Good |
Dealer Name |
Rayco of Michigan |
Price |
$45.000 |
Location |
Northville Michigan |
Appearance |
4-5 (scale of 1 to 10) |
Phone |
313-402-6664 Call Phil or email Phil |
Additional Details |
Needs New Selenoid Valves. Rebuilt Detroit Diesel 1271 w/ 450 HP, Has the larger of the 2 loader options, extra knives included |
|
| |
| |
| |
|
 |
Make |
CAT |
Dealer Stock # |
|
Model |
277MTL |
Serial # |
|
Year |
2004 |
Hours |
2,003 |
Condition |
Excellent |
Dealer Name |
Rayco of Michigan |
Price |
$32,500 |
Location |
Northville Michigan |
Appearance |
9 (scale of 1 to 10) |
Phone |
313-402-6664 Call Phil |
Additional Details |
Cat 78 HP, 2,950 Lift Capacity @ 50% operating capacity, 3.1 psi ground pressure, 5,900 Tip Up Capacity, 9,411 lbs, 22 GPM/3,300 psi auxillary hydraulic, 121" Dump Height, New Tracks, Rollers are 60%, Cab and Heat, Hydraulic Quick Attach automatically from inside cab. |
|
| |
| |
| |
|
 |
Make |
CAT |
Dealer Stock # |
|
Model |
246 |
Serial # |
|
Year |
2002 |
Hours |
1541.2 |
Condition |
Excellent |
Dealer Name |
Rayco of Michigan |
Price |
$22,000 |
Location |
Northville, Michigan |
Appearance |
9 (scale of 1 to 10) |
Phone |
313-402-6664 |
Additional Details |
78 HP Cat Diesel Engine, 7,142 pounds, 2,000 pound lift all the up to 10 feet up without tipping, 4,000 pounds up 5 feet without tipping, 22 GPM / 3,300 psi auxilary hydraulic system, Cab and Heat, Bucket and Forks, runs flawlessly and smooth.Needs rubber. |
|
| |
| |
| |
|
 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
T275 |
Serial # |
|
Year |
1999 |
Hours |
3618 |
Condition |
Very good |
Dealer Name |
|
Price |
$41,000 |
Location |
Lockport, IL |
Appearance |
8 (scale of 1 to 10) |
Phone |
815. 693-6276 Scott hoffman@homertree.com |
Additional Details |
238hrs on new cutter wheel motor, and rebuilt cutter pump. Track pumps tested, and pump drive rebuilt at that time. has brushless alternator, updated flange bearings. 168 hrs on reman. computer board, very well maintained machine. |
|
| |
| |
| |
|
 |
Make |
Rayco |
Dealer Stock # |
|
Model |
T275 |
Serial # |
|
Year |
1997 |
Hours |
2150 |
Condition |
Very Good |
Dealer Name |
|
Price |
$95,000 -OBO |
Location |
Spotsylvania , VA |
Appearance |
9 (scale of 1 to 10) |
Phone |
703.671.7757 Joe |
Additional Details |
Many parts go with the machine |
|
| |
| |
| |
|
 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
C140 FM |
Serial # |
|
Year |
2007 |
Hours |
200 |
Condition |
Great |
Dealer Name |
|
Price |
$145000 |
Location |
Elberton, GA |
Appearance |
9 (scale of 1 to 10) |
Work Required |
|
Phone |
706.988.9530 Jamie |
Additional Details |
|
|
| |
| |
| |
|
 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
87FM |
Serial # |
00904138 |
Year |
2004 |
Hours |
1780 |
Condition |
Excellent |
Dealer Name |
|
Price |
$59000 |
Location |
Quitman, GA |
Appearance |
7 (scale of 1 to 10) |
Work Required |
|
Phone |
229-292-5480 |
Additional Details |
One owner/operator, dependable tier 1 Deutz, rubber tracks with extra set of steel tracks, hydraulic winch, clean, serviced and ready to work, owner retiring |
|
| |
| |
| |
|
 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
C140 |
Serial # |
C1400090806 |
Year |
2006 |
Hours |
755 |
Condition |
Good |
Dealer Name |
DW of LA |
Price |
$125000 |
Location |
Houston, TX |
Appearance |
8 (scale of 1 to 10) |
Work Required |
|
Phone |
713-875-7651 |
Additional Details |
Quick attach with 6 foot head |
|
| |
| |
| |
|
 |
Make |
RAYCO |
Dealer Stock # |
|
Model |
C130 |
Serial # |
|
Year |
2006 |
Hours |
530 |
Condition |
Excellent |
Dealer Name |
|
Price |
$110,000 obo |
Location |
Slidell, LA |
Appearance |
8 (scale of 1 to 10) |
Work Required |
|
Phone |
504.578.1349 Keith |
Additional Details |
Comes with stump cutter head and winch |
|
| |
| |
